FrogDaddy SafeShip Containers

Industry-leading shipping containers. 

• Crush-proof body
• Vented with thermal hole punch for perfect vent holes that wont hurt frogs
• Screw-on top cap for ultra secure containment even in the roughest conditions, no taping needed!
• Internal components provide a corner of moisture that disperses through amphibian safe foam. This foam is pressurized and is guaranteed to not move in transit, and provides perfect moisture levels for frogs. No more getting trapped in moss or towels, or over or under saturation of the internal components. Foam disperses moisture evenly and stabilizes humidity.
• Species listing sticker to accurately label by species, sex, and quantity.

To assemble:

All components will come dried. Internal components will be: 1 foam insert, 1 larger bottom paper towel, and 1 smaller side paper towel. Paper towel in bottom must be completely saturated and pressed down into a puck. Next, place the foam insert in a bowl filled with distilled or spring water and squeeze under the water in and out approximately 10 times, then push foam insert down into container so that it presses hard against the bottom wet paper towel. Tip and drain excess water from the SafeShip Container. Take the other piece of paper towel and compress into triangular divot in the foam until it sits flush with the foam piece as shown in picture #3. Press entire internal component to drain most of the excess water. Foam should be glistening but not wet to touch while triangular paper towel should be very moist. Place plants and frog into the container and screw top on. Always ensure any thermal regulation packs (phase packs, heat packs, cool packs, etc) are not touching the container. Always ensure there is packaging material between each container so that it will not move in transit and will not be directly touching thermal regulation to ensure safe shipments.

Wholesale is available.